BD Tariff.

HS Code 72202010

Cold-Rolled Stainless Steel,<600mm Wide, Thickness Less Than 0.125mm

CD5%
SD0%
VAT15%
AIT5%
RD0%
AT7.5%
TTI33.63%

Worked example

On an assessable value of BDT 100,000, the total duty and taxes payable on 72202010 would be approximately BDT 33,630.00, because the Total Tax Incidence is 33.63% of the assessable value.

What these figures mean

Cold-Rolled Stainless Steel,<600mm Wide, Thickness Less Than 0.125mm is classified under HS code 72202010, which sits in heading 7220 (Stainless steel; flat-rolled products of width less than 600mm) of chapter 72 (Iron and steel).

Under the Bangladesh Operative Tariff 2026-2027 this line attracts Customs Duty of 5%, Supplementary Duty of 0%, VAT of 15%, Advance Income Tax of 5%, Regulatory Duty of 0% and Advance Tax of 7.5%. Combined, these produce a Total Tax Incidence of 33.63%, which is the figure to multiply by the assessable value of your consignment.

The assessable value is normally the CIF value of the goods plus landing charges. Duties and taxes are applied in a defined order rather than simply added together, which is why the TTI is not the plain sum of the individual rates.

Recorded imports

Between December 2025 and May 2026, NBR recorded commercial imports under 72202010 in 6 of 6 months, totalling 152,877 kg at an assessable value of BDT 111,261,181. That is an average of BDT 728 per kilogram — useful as a rough check on whether a declared value looks plausible. In May 2026 it was the 978th largest of 4,066 tariff lines by assessable value.

MonthNet weightAssessable valuePer kg
December 2025 23,387 kg BDT 18,109,601 BDT 774
January 2026 25,213 kg BDT 19,207,763 BDT 762
February 2026 45,036 kg BDT 29,167,988 BDT 648
March 2026 14,909 kg BDT 11,310,760 BDT 759
April 2026 8,326 kg BDT 6,208,411 BDT 746
May 2026 36,006 kg BDT 27,256,658 BDT 757

Import figures: NBR Import Statements (IM-4 commercial), December 2025 – May 2026. Assessable value is the customs value on which duty is charged, not the retail or invoice price.

Source: NBR Operative Tariff 2026-2027. The full schedule was reconciled against NBR's online duty calculator before publication; figures were last checked against NBR's live operative tariff search on 10 October 2026.

How this line compares

Chapter 72 contains 188 tariff lines, averaging 51.03%. At 33.63%, 72202010 sits below that average by 17.4 percentage points. It is the 149th most heavily taxed line in the chapter.

Across the whole Operative Tariff the mean is 61.08%, so this line is cheaper than the typical import by 27.45 points.

Within heading 7220 alone, rates run from 33.63% to 39.75% across 6 lines. Classification inside a single heading can change the bill substantially, so confirm the eight-digit code rather than working from the four-digit heading.

No supplementary duty applies here, which is the normal case — SD is zero on 78% of the tariff. Where it does apply it usually dominates every other component.

Other codes in heading 7220

72201100 Hot-Rolled Stainless Steel, <600mm By >=4.75mm TTI 39.75% 72201210 Hot-Rolled Stainless Steel, Thickness Less Than 0.12mm TTI 33.63% 72201290 Hot-Rolled Stainless Steel (Excl.Thickness Less Than 0.125mm) TTI 39.75% 72202090 Not Further Worked Than Cold-Rolled(Cold-Reduced)Excl.Thickness <0.125 Mm TTI 39.75% 72209000 Rolled products stainless steel, <600mm wide, nes TTI 39.75%

See all codes in heading 7220 →