BD Tariff.

HS Code 73052000

Iron/Steel Casing For Drilling For Oil Or Gas, >406.4mm External Diameter

CD25%
SD0%
VAT15%
AIT5%
RD5%
AT7.5%
TTI64.25%

Worked example

On an assessable value of BDT 100,000, the total duty and taxes payable on 73052000 would be approximately BDT 64,250.00, because the Total Tax Incidence is 64.25% of the assessable value.

What these figures mean

Iron/Steel Casing For Drilling For Oil Or Gas, >406.4mm External Diameter is classified under HS code 73052000, which sits in heading 7305 (Iron or steel (excluding cast iron); tubes and pipes (e.g. welded, riveted or similarly closed), having circular cross-sections, external diameter of which exceeds 406.4mm, not seamless) of chapter 73 (Articles of iron or steel).

Under the Bangladesh Operative Tariff 2026-2027 this line attracts Customs Duty of 25%, Supplementary Duty of 0%, VAT of 15%, Advance Income Tax of 5%, Regulatory Duty of 5% and Advance Tax of 7.5%. Combined, these produce a Total Tax Incidence of 64.25%, which is the figure to multiply by the assessable value of your consignment.

The assessable value is normally the CIF value of the goods plus landing charges. Duties and taxes are applied in a defined order rather than simply added together, which is why the TTI is not the plain sum of the individual rates.

Recorded imports

Between February 2026 and February 2026, NBR recorded commercial imports under 73052000 in 1 of 6 months, totalling 21,920 kg at an assessable value of BDT 9,996,472. That is an average of BDT 456 per kilogram — useful as a rough check on whether a declared value looks plausible. In February 2026 it was the 1,714th largest of 4,051 tariff lines by assessable value.

MonthNet weightAssessable valuePer kg
February 2026 21,920 kg BDT 9,996,472 BDT 456

Import figures: NBR Import Statements (IM-4 commercial), December 2025 – May 2026. Assessable value is the customs value on which duty is charged, not the retail or invoice price.

Source: NBR Operative Tariff 2026-2027. The full schedule was reconciled against NBR's online duty calculator before publication; figures were last checked against NBR's live operative tariff search on 10 October 2026.

How this line compares

Chapter 73 contains 157 tariff lines, averaging 64.73%. At 64.25%, 73052000 sits below that average by 0.48 percentage points. It is the 37th most heavily taxed line in the chapter.

Across the whole Operative Tariff the mean is 61.08%, so this line is dearer than the typical import by 3.17 points.

No supplementary duty applies here, which is the normal case — SD is zero on 78% of the tariff. Where it does apply it usually dominates every other component.

Other codes in heading 7305

73051100 Iron/Steel Line Pipe,Longitud.Submerged Arc Welded,Circ.X-Section >406.4mm TTI 64.25% 73051200 Iron/Steel Line Pipe,Longitudnlly Welded,Nes,Circ.X-Sect.>406.4mm Ext.Diam TTI 64.25% 73051900 Iron/Steel Line Pipe,Spirally Welded,Circular X-Section,>406.4mm Ext.Diam TTI 64.25% 73053100 Longitudinally welded TTI 64.25% 73053900 Iron/steel tubes and pipes, spirally welded, >406.4mm external diameter TTI 64.25% 73059000 Iron/steel tubes, riveted, >406.4mm external diameter TTI 64.25%

See all codes in heading 7305 →