BD Tariff.

HS Code 72091690

Flat/Cold-Rolled Iron/Steel, In Coils, Width >=600mm, >1mm But <3mm Thick

CD10%
SD0%
VAT15%
AIT5%
RD10%
AT7.5%
TTI52%

Worked example

On an assessable value of BDT 100,000, the total duty and taxes payable on 72091690 would be approximately BDT 52,000.00, because the Total Tax Incidence is 52% of the assessable value.

What these figures mean

Flat/Cold-Rolled Iron/Steel, In Coils, Width >=600mm, >1mm But <3mm Thick is classified under HS code 72091690, which sits in heading 7209 (Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated) of chapter 72 (Iron and steel).

Under the Bangladesh Operative Tariff 2026-2027 this line attracts Customs Duty of 10%, Supplementary Duty of 0%, VAT of 15%, Advance Income Tax of 5%, Regulatory Duty of 10% and Advance Tax of 7.5%. Combined, these produce a Total Tax Incidence of 52%, which is the figure to multiply by the assessable value of your consignment.

The assessable value is normally the CIF value of the goods plus landing charges. Duties and taxes are applied in a defined order rather than simply added together, which is why the TTI is not the plain sum of the individual rates.

Recorded imports

Between December 2025 and May 2026, NBR recorded commercial imports under 72091690 in 6 of 6 months, totalling 3,424,715 kg at an assessable value of BDT 334,039,872. That is an average of BDT 98 per kilogram — useful as a rough check on whether a declared value looks plausible. In May 2026 it was the 987th largest of 4,066 tariff lines by assessable value.

MonthNet weightAssessable valuePer kg
December 2025 232,846 kg BDT 30,286,337 BDT 130
January 2026 840,391 kg BDT 81,920,041 BDT 97
February 2026 845,932 kg BDT 71,837,034 BDT 85
March 2026 458,694 kg BDT 56,623,037 BDT 123
April 2026 772,052 kg BDT 66,471,445 BDT 86
May 2026 274,800 kg BDT 26,901,978 BDT 98

Bonded imports. A further 20,410 kg worth BDT 2,930,862 entered under the bonded-warehouse regime in the same period — goods brought in duty-free as inputs on the undertaking that they leave again as exports, which in Bangladesh overwhelmingly means ready-made garments. Bonded entries account for 0.9% of the total value imported under this code, the rest entering commercially.

Import figures: NBR Import Statements (IM-4 commercial, IM-7 bonded), December 2025 – May 2026. Assessable value is the customs value on which duty is charged, not the retail or invoice price.

Source: NBR Operative Tariff 2026-2027. The full schedule was reconciled against NBR's online duty calculator before publication; figures were last checked against NBR's live operative tariff search on 10 October 2026.

How this line compares

Chapter 72 contains 188 tariff lines, averaging 51.03%. At 52%, 72091690 sits above that average by 0.97 percentage points. It is the 47th most heavily taxed line in the chapter.

Across the whole Operative Tariff the mean is 61.08%, so this line is cheaper than the typical import by 9.08 points.

Within heading 7209 alone, rates run from 52% to 70.38% across 11 lines. Classification inside a single heading can change the bill substantially, so confirm the eight-digit code rather than working from the four-digit heading.

No supplementary duty applies here, which is the normal case — SD is zero on 78% of the tariff. Where it does apply it usually dominates every other component.

Other codes in heading 7209

72091500 Flat/Cold-Rolled Iron/Steel, In Coils, Width >=600mm, >=3mm Thick TTI 52% 72091610 COLD ROLLED STEEL SHEET..Of a thickness exceeding 1 mm but less than 3 mm TTI 52% 72091710 Cold rolled steel sheet....Of a thickness of 0.5 mm or more but not exceeding 1… TTI 52% 72091790 Flat/Coldrolled Iron/Steel,In Coils,Width >=600mm, >=0.5mm But <=1mm Thick TTI 52% 72091800 Flat roll Prod. in coil not Fut. work.. Cold roll thickness <.5mm TTI 70.38% 72092500 Flat/Cold-Rolled Iron/Steel, Not In Coils, Width >=600mm, >=3mm Thick TTI 52% 72092600 Flat/Cold-Rolled Iron/Steel,Not In Coils,Width>=600mm, >1mm But<3mm Thick TTI 52% 72092700 Flat/Coldrolled Iron/Steel,Not In Coils,Wid>=600mm,>=0.5mm But <=1mm Thick TTI 52% 72092800 Flat/Cold-Rolled Iron/Steel, Not In Coils, Width >=600mm, < 0.5mm Thick TTI 52% 72099000 Flat/Coldrolled Iron/Non-Alloy Steel,Wid>=600mm,Not Clad,Plated/Coated Nes TTI 52%

See all codes in heading 7209 →