BD Tariff.

HS Code 72091800

Flat roll Prod. in coil not Fut. work.. Cold roll thickness <.5mm

CD25%
SD0%
VAT15%
AIT5%
RD10%
AT7.5%
TTI70.38%

Worked example

On an assessable value of BDT 100,000, the total duty and taxes payable on 72091800 would be approximately BDT 70,380.00, because the Total Tax Incidence is 70.38% of the assessable value.

What these figures mean

Flat roll Prod. in coil not Fut. work.. Cold roll thickness <.5mm is classified under HS code 72091800, which sits in heading 7209 (Iron or non-alloy steel; flat-rolled products, width 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated) of chapter 72 (Iron and steel).

Under the Bangladesh Operative Tariff 2026-2027 this line attracts Customs Duty of 25%, Supplementary Duty of 0%, VAT of 15%, Advance Income Tax of 5%, Regulatory Duty of 10% and Advance Tax of 7.5%. Combined, these produce a Total Tax Incidence of 70.38%, which is the figure to multiply by the assessable value of your consignment.

The assessable value is normally the CIF value of the goods plus landing charges. Duties and taxes are applied in a defined order rather than simply added together, which is why the TTI is not the plain sum of the individual rates.

Recorded imports

Between December 2025 and May 2026, NBR recorded commercial imports under 72091800 in 4 of 6 months, totalling 23,781 kg at an assessable value of BDT 3,175,040. That is an average of BDT 134 per kilogram — useful as a rough check on whether a declared value looks plausible. In May 2026 it was the 2,719th largest of 4,066 tariff lines by assessable value.

MonthNet weightAssessable valuePer kg
December 2025 9,490 kg BDT 1,116,965 BDT 118
January 2026 5,362 kg BDT 909,230 BDT 170
April 2026 3,000 kg BDT 294,584 BDT 98
May 2026 5,929 kg BDT 854,261 BDT 144

Import figures: NBR Import Statements (IM-4 commercial), December 2025 – May 2026. Assessable value is the customs value on which duty is charged, not the retail or invoice price.

Source: NBR Operative Tariff 2026-2027. The full schedule was reconciled against NBR's online duty calculator before publication; figures were last checked against NBR's live operative tariff search on 10 October 2026.

How this line compares

Chapter 72 contains 188 tariff lines, averaging 51.03%. At 70.38%, 72091800 sits above that average by 19.35 percentage points. It is the 33rd most heavily taxed line in the chapter.

Across the whole Operative Tariff the mean is 61.08%, so this line is dearer than the typical import by 9.3 points.

Within heading 7209 alone, rates run from 52% to 70.38% across 11 lines. Classification inside a single heading can change the bill substantially, so confirm the eight-digit code rather than working from the four-digit heading.

No supplementary duty applies here, which is the normal case — SD is zero on 78% of the tariff. Where it does apply it usually dominates every other component.

Other codes in heading 7209

72091500 Flat/Cold-Rolled Iron/Steel, In Coils, Width >=600mm, >=3mm Thick TTI 52% 72091610 COLD ROLLED STEEL SHEET..Of a thickness exceeding 1 mm but less than 3 mm TTI 52% 72091690 Flat/Cold-Rolled Iron/Steel, In Coils, Width >=600mm, >1mm But <3mm Thick TTI 52% 72091710 Cold rolled steel sheet....Of a thickness of 0.5 mm or more but not exceeding 1… TTI 52% 72091790 Flat/Coldrolled Iron/Steel,In Coils,Width >=600mm, >=0.5mm But <=1mm Thick TTI 52% 72092500 Flat/Cold-Rolled Iron/Steel, Not In Coils, Width >=600mm, >=3mm Thick TTI 52% 72092600 Flat/Cold-Rolled Iron/Steel,Not In Coils,Width>=600mm, >1mm But<3mm Thick TTI 52% 72092700 Flat/Coldrolled Iron/Steel,Not In Coils,Wid>=600mm,>=0.5mm But <=1mm Thick TTI 52% 72092800 Flat/Cold-Rolled Iron/Steel, Not In Coils, Width >=600mm, < 0.5mm Thick TTI 52% 72099000 Flat/Coldrolled Iron/Non-Alloy Steel,Wid>=600mm,Not Clad,Plated/Coated Nes TTI 52%

See all codes in heading 7209 →